Precision Steel Services, Inc. aluminum extrusions, thermal barrier, corrugated sheets, aluminum fabricator

Precision Steel Services, Inc. aluminum extrusions, thermal barrier, corrugated sheets, aluminum fabricator
Extrusion Roll Forming
Curving Angles Shearing
Azon Thermal Barrier Welding
Hydraulic 90 Ton Brake Press Wygoma
Punching & Notching Capabilities Ironworker 

 

Aluminum Extrusions Fabrication

Inventory customer's material and fabricate per drawings, cut to length, mill, punch, miter, notch, or drill holes.  Tolerances +/- 1/32"

back to top

 

 

Curving Angles
Buffalo bending rolls (horizontal type) No. 1 machine capacity for curving angle leg out:  3" x 3" x 3/8" with a minimum Dia. 24".  Curving angle leg in:  2 - 1/2" x 2- 1/2" x 3/8" with a minimum Dia. 30"

 

back to top

  Curving angles stainless steel

 

 
Continuous debridge or skip debridge

 

  Azon Thermal Barrier
Azon SU-207 polyurethane is a high strength polymer with thermal barrier properties similar to wood.  For best results, pouring and debridging is recommended after painting or anodizing of the aluminum extrusion.  PSSI has the capabilities of pouring lengths
9'-0" to 30'-0", and debridging continuously or skip debridging.

back to top

 

Hydraulic 90 Ton Brake Press
PSSI can meet all your flashing requirements; down spouts, industrial gutters up to 10' capacity on aluminum, galvanized and stainless steel.

back to top

  Hydraulic 90 ton brake metal

 

 
    Punching & Notching
With the capability up to 12 feet our Unipunch System can punch multiple holes in seconds.

back to top

 

 

Roll Forming
PSSI can roll form inch corrugated sheets that are painted or galvanized Gauges range from 18, 20, 22, 24, and 26.

back to top

  Roll forming

 

 
Shear


  Shear
Capacity 3/16 inch steel 12 feet long.

 

 

back to top

 

Welding
Mig and Tig welding can be done on aluminum, galvanized, mild and stainless steel.

back to top

 

     
Wygoma gang drills


  Wygoma
Our Wygoma gang drills and miters 45 degrees up to 90 degrees with a 2 saw 20 inch straight cutter.

 

back to top

 

Mubea (HPSN 600) 66 Ton Ironworker 

Shearing Capabilities - 18" x 3/8" Mild Steel
90 Degree Angle - 5" x 5" x 3/8"
Hole Punching up to 1 - 1/16" thru 3/4" Mild Steel

back to top

  Ironworker

 

 

Precision Steel Services, Inc.
650 Martin Luther King Jr. Blvd.
P.O. Box 72   
Farrell, PA  16121-0072

Toll Free: 1-800-418-0375
Office: 724-347-2770
Fax: 724-347-5965
E-mail:
lcarnahan@precisionsteel.org


Capabilities | Products | Our Company | Directions | Contact Us

2003 - 2005 Precision Steel Services, Inc - All Rights Reserved